AEG DR 4149 DAB+ Mode D'emploi page 46

English
46
with playback. Let us assume that you are listening to a
radio station in a relatively loud environment. By increas-
ing the volume you can play the quiet sections louder.
This however has the disadvantage that the loud sections
become uncomfortably loud. It makes sense here to
reduce the dynamic range. Select between the options:
- DRC off: The dynamic range is not reduced.
- DRC high: The dynamic range is sharply reduced.
- DRC low: The dynamic range is slightly reduced.
• Prune: It may be that you can no longer receive some sta-
tions after a station scan or change of location. With this
function you can delete these stations from the reception
list. Select "YES" and confirm with the OK button.
DAB + FM Menu (SYSTEM)
The following submenus can be found in the SYSTEM menu.
• Time: Set the time and the date manually. You can also
set the automatic update and the display format of the
date.
- Set Time/Date: Here, you can manually set the time
and date.
Auto update: Here, select the source from which the
-
automatic update of time and date should be carried
out. Select from: Update from all sources, DAB only,
FM only and no update.
- Set 12/24 hour: Select between 24 hour and 12 hour
display.
NOTE: In 12 hour display
AM = morning, PM = afternoon appears.
- Set date format: Select between the two options for
displaying the date. Day-Month-Year or Month-Day-
Year.
• Language: Change the OSD language.
• Factory reset: Select the "YES" command if you want to
reset the device again to the factory defaults. All settings
which you have made will be lost.
• SW version: Here, you can display the Software Version
of the device.
Alarm function
You can set the device in such a way that it switches on at a
specific time. You have the option of setting two alarm times.
You can also use this function to switch to another radio sta-
tion at a specific time.
• The alarm function can only be set if the unit is switched
on.
• To select an option, press the UP/DOWN buttons (15/13).
• Select an option with the OK button (14).
Setting the alarm time
Keep the LIGHT / ALARM/SNOOZE button pressed
- 1x = to set the first alarm time
- 2x = to set the second alarm time
The instructions for setting alarm time 1 are given below
1. "ALARM 1 SETUP" appears on the display. The " "
symbol also flashed on the display.
2. Press the OK button. "ALARM 1 WIZARD" appears on
the display and the hours for the switch-on time flash.
3. Now set the alarm time.
4. DURATION: Set the time, after which the device will
switch off automatically.
5. SOURCE: Select a source by which you want to be awak-
ened. Select from: BUZZER (beep), DAB, FM.
NOTE: Important!
Consider setting the required volume with the control
(9). The unit switches on with the last set volume.
5a If DAB or FM has been selected, now select the desired
radio station which should play when the set alarm time
is reached. You choose from "LAST LISTENED" and the
preset stations.
6. Select the time at which the alarm time needs to be acti-
vated. Select from: DAILY, ONCE, WEEKENDS, WEEK-
DAYS.
6a If ONCE is selected, now set the date at which you want
to be awakened.
7. Activate the alarm time by selecting "ALARM ON".
After you have made all your settings, the message "ALARM
SAVED" briefly appears. The activated alarm function is
shown on the display by the " / " symbol.
Turn off the alarm signal
To turn off the alarm, keep the LIGHT / ALARM/SNOOZE
button (3) pressed for approx. 2 seconds. The message
"ALARM OFF" appears briefly on the display.
Snooze
The automatically set alarm function can be switched off for
10 minutes with the LIGHT / ALARM/SNOOZE button.
NOTE:
If the Snooze function is activated, the time until the next
alarm is shown on the display. The "
on the display.
Deactivate alarm function
1. Keep the LIGHT / ALARM/SNOOZE button (3) pressed
briefly once or twice.
2. Proceed as described above and select the option
"ALARM OFF" in step 7. The " " or " " symbol goes
out.
Cleaning and maintenance
CAUTION:
Do not immerse the device in water.
" symbol appears