For Your Safety; Intended Use; Improper Use - Emerson AVENTICS RAK Mode D'emploi

AVENTICS
2

For your safety

The rotary actuator, series RAK, has been manufactured in
accordance with current engineering standards and safety
regulations. Even so, there is a risk of injury or damage if the
following general safety instructions and the specific warnings
given in this instruction manual are not observed.
Read these instructions completely before working with the
Drehantrieb.
Keep these instructions in a location where they are accessible
to all users at all times.
Always include the operating instructions when you pass the
rotary actuator, series RAK on to third parties.
2.1

Intended use

The rotary actuator, series RAK, may only be used within the
limits listed in the technical data.
The rotary actuator, series RAK, is primarily intended to be
used in industrial applications.
Intended use includes having read and understood these
instructions, especially the chapter "For your safety".
2.2

Improper use

It is considered improper use when the rotary actuator
is used for any application not stated in these instructions, or
is used under operating conditions that deviate from those
described in these instructions.
| RAK | R402005099–BDL–001–AB 31