Troubleshooting - Sony VPL-HS10 Mode D'emploi

Masquer les pouces Voir aussi pour VPL-HS10:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Others
This section describes how to solve the
problems, how to replace a lamp and air
filter, etc.

Troubleshooting

Power
c Wait for about one minute
The power is not
turned on.
before turning on the power.
(1 page 22)
c Close the lamp cover securely.
(1 page 53)
c Close the air filter cover
securely. (1 page 54)
Picture
c Check that the proper
No picture.
connections have been made.
(1 page 13)
c Select the input source correctly
using the INPUT button.
(1 page 21)
c Set the computer signal to output
from an external monitor.
c Set the computer signal to output
only to an external monitor.
The picture from the PJ
c Select "Computer",
MULTI connector is
"Component" or "Video GBR"
colored strange.
for "Input-A Signal Sel" in the
SET SETTING
according to the input signal.
(1 page 29)
c Adjust the picture in the "Adjust
Color balance is
incorrect.
Picture ..." of the PICTURE
SETTING
(1 page 27).
c Set "Color System" in the SET
SETTING
the color system being input.
(1 page 29)
The picture is too dark. c Adjust the contrast or brightness
in the "Adjust Picture ..." of the
PICTURE SETTING
properly. (1 page 27)
The picture is not clear. c Adjust the focus with the
FOCUS +/–. (1 page 22)
c Condensation has occurred on
the lens. Leave the projector for
about two hours with the power
on.
c Adjust "Dot Phase" for "Adjust
The picture flickers.
Signal..." in the INPUT
SETTING
(1 page 28)
Sound
c Sound can be heard only when
No sound.
an MPEG1 format movie picture
is played. (1 page 27)
c Adjust "Volume" in the
PICTURE SETTING
menu, or press VOLUME + on
the remote control.
On-screen display
c Set "Status" in the MENU
On-screen display does
not appear.
SETTING
(1 page 29)
Remote control
c Batteries could be weak.
The remote control
does not work.
Replace with new batteries. (1
page 6)
c Insert the batteries with correct
polarities. (1 page 6)
"Memory stick"
c Insert the "Memory Stick" with
The "Memory Stick"
cannot be inserted into
the arrow mark pointing toward
the "Memory Stick"
the "Memory Stick" slot of the
slot.
projector. (1 page 33)
menu
menu
menu to match
menu
menu properly.
menu to "On."
51
Troubleshooting
GB

Publicité

Table des Matières
loading

Table des Matières