Sony VPL-HS10 Mode D'emploi page 29

SET SETTING
Item Description
Smart APA With this item set to On, the APA function
works automatically for a signal input from
a computer so that the picture can be seen
clearly. You can also activate the APA
function by pressing the APA button on the
remote control.
Tip
The APA (Auto Pixel Alignment) automatically
adjusts the input signal from a computer so that
the picture can be seen clearly.
Auto Input Set to On when an optional Interface Unit
Search such as the IFU-HS1 is connected to the PJ
MULTI connector on the projector.
Input-A Signal Selects the signal input from the equipment
Sel. by selecting "Input-A" with the INPUT
button.
Computer: Inputs the signal from a
computer.
Component: Inputs the component or
progressive component signal from a
DVD player, digital tuner, etc.
Video GBR: Inputs the signal from a TV
game or HDTV broadcast.
Digital Signal Selects the signal input from the equipment
Sel. by selecting "Digital" with the INPUT
button.
Computer: Inputs the signal from a
computer.
Video GBR: Inputs the signal from a
digital tuner, etc.
Note
Before you change the "Digital Signal Sel."
setting, disconnect the DVI cable and turn off the
digital tuner, etc.
Color System Select the color system of the input signal.
Auto: Selects the color system of the input
signal automatically from among NTSC,
PAL, SECAM, NTSC
PAL-N.
"NTSC3. 58"–"PAL-N": Sets the color
system to the selected system manually.
Power Saving When set to On, the POWER SAVING
indicator lights. The projector goes into
power saving mode if no signal is input for
10 minutes, and the lamp goes out and the
cooling fan keeps running. In power saving
mode, no button functions for the first 60
seconds. It is cancelled when a signal is
input or any button is pressed. If you do not
set the projector to power saving mode,
select Off.
Illumination Turns on the illumination on the top panel
of the projector when set to On. It turns off
when set to Off.
MENU SETTING
Item Description
Status Set to Off to turn off the on-screen
displays except for the menus, message
when turning off the power, and warning
messages.
Language Selects the language used in the menu and
on-screen displays. Available languages
are: English, French, German, Italian,
Spanish, Portuguese, Japanese, Chinese
and Korean.
Item
Menu Position
Menu Color
Item
V Keystone
Side Shot
Image Flip
Background
, PAL-M or
4.43
Test Pattern
High Altitude
Mode
Item
fH
fV
Lamp Timer
Description
Selects the display position from Top
Left, Bottom Left, Center, Top Right
and Bottom Right.
Selects the tone of the menu display from
White or Black.
INSTALL SETTING
Description
Corrects the vertical trapezoidal distortion
of the picture. (
Auto: Normally set to this postion.
Manual: Sets a lower value (– direction)
when the bottom of the trapezoid is
longer than the top. Sets a higher value
(+ direction) when the top of the
trapezoid is longer than the bottom. If
you project the picture using "Side
Shot" only, set to "Manual," and adjust
the level to "0."
Note
The "V Keystone" adjustment may not correct
the trapezoidal distortion perfectly, depending on
the room temperature or the screen angle.
Corrects the horizontal trapezoidal
distortion of the picture. (
Set the level to "0" when you adjust the
picture using "V Keystone" only.
Flips the picture on the screen horizontally
and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and
vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Selects the background color of the screen
when no signal is input. You can select
"Black" or "Blue."
When set to On, a test pattern is displayed
on the screen when adjusting using the
"Lens Zoom," "Lens Focus," "Side Shot"
or "V Keystone." If you do not want to
display a test pattern, set to Off.
Off: Use this setting when using the
projector at normal altitudes.
On: Use this setting when using the
projector at an altitude of 1,500 m or
higher.
INFORMATION
Description
Displays the horizontal frequency of the
input signal.
Displays the vertical frequency of the input
signal.
Indicates how long the lamp has been
turned on.
)
)
29
Menu Lists
GB