Replacing The Exhaust Filter - Komet Vacuboy Notice D'utilisation

Maintenance and Fault Repair
8.6

Replacing the exhaust filter

Danger!
Electric shock possible!

Pull out the mains power plug before starting work!
Vacuboy, PlusVac 20, PlusVac 80

Accessible through lifting up the
casing:
- Remove the insertion plates from
the chamber.
Secure the cover with the cover
-
down holder.
- Vacuboy, PlusVac 20: Open the
casing with removing the two
screws on the backside of the
machine and lift up the casing
from the backside.
- PlusVac 80: Open the casing
with removing the two screws on
the front side of the machine and
lift up the casing from the front
side.
Operating Instructions- Translation
PlusVac 21

Accessible through the open
backside.
3 3
Pump 21 m /h Pump 40 m /h

Let the pump
remove only
through a
trained person.
3
10 m /h : Vacuboy
3
21 m /h : PlusVac 20 – PlusVac 21 –
PlusVac 80
1
1 Exhaust filter

Loosen the 4 screws on the cover.

Loosen the screw in the middle of the
filter spring.

Pull out the exhaust filter element
form the filter casing 1.

Bring in the new exhaust filter
element.

Please check if the O-Ring is in the
correct position.

Screw the filter spring and the cover
tight.
1
3
40 m /h : PlusVac 21
19 04 249 - 01.01.2012
1
Eng - 28 /32