Becker Centronic SunWindControl SWC745-II Notice De Montage Et D'utilisation page 47

SETTING: INTERMEDIATE POSITION, FABRIC TENSION/
TILT, WINTER OFF/ON
WINTER
1. You have confirmed the menu items SUN
pears.
Set the intermediate position/tilt position (intermediate posi-
tions I and II) according to the instructions for the radio re-
ceiver.
2. You can turn winter operation on or off using the +/- button. Confirm your
selection with OK. The receiver confirms the selection.
A manual extension must no longer be possible despite an
extend command. Check the setting.
3. The WINTER OFF/ON function is now set.
4. For details on further programming in the SETTING menu, please continue
reading.
(DELAY ). WINTER OFF ap-
47 - en