Becker Centronic SunWindControl SWC745-II Notice De Montage Et D'utilisation page 45

PROGRAM WEEK, BLOCK, INDIVIDUAL, shade time,
AUTO shade time
AUTO
SHADE TIME
1. Press the MENU button.
2. To select the PROGRAM menu, press the + button until PROGRAM appears.
3. Confirm with OK.
4. Press the + button until WEEK appears.
5. Use the +/- buttons to select the required function:
Press OK to go to the WEEK menu item (1-7). All further in-
Week
puts will be applied to each day of the week
Press OK to go to the BLOCK menu item (BLOCK (1-5),
Block
BLOCK (6,7)). All further inputs will be applied to BLOCK
(1-5) and BLOCK (6,7).
Press OK to go to the INDIVIDUAL menu item (1,2,3,4,5,6,7).
Individual
All further inputs will be applied to each day of the week indi-
vidually
In the FUNCTION menu, you can choose between shade time
and AUTO shade time.
When --:-- is shown on the display (between 23:59 and
00:00), the shade time is not executed.
6. Confirm with OK. Shade time / AUTO shade time appears.
7. You can now set the shade time / AUTO shade time using the +/- buttons.
Confirm each setting with OK.
8. Press the MENU button to switch to Operating mode.
PROGRAM
PROGRAM
WEEK
AUTO
SHADE TIME
45 - en