Sony MSAC-PR1 Mode D'emploi page 17

Masquer les pouces Voir aussi pour MSAC-PR1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5
Click "OK" in "Sony MSAC-PR1" properties.
6
Click the "OK" button in "System properties" and a message promoting
you to restart the computer will be displayed. Restart the computer.
Caution
On some machines the computer may not restart or the MSAC-PR1 may not
function normally with this procedure. If this happens, erase only the
parameters that you added to return the adaptor setting to "/flash/W95."
The printer does not work well
If a printer which was functioning normally ceases to do so after installing
MSAC-PR1, or a newly installed printer does not function properly, this can
be rectified by closing all applications not directly related to printing and
changing the printer driver settings.
C Deleting an application from the start up folder
Depending on the type of printer you are using, the parallel port may be occupied
by some other application installed at the time of printer driver installation.
Such applications are automatically placed in the task tray when the computer is
started, interrupting communications between the PC and MSAC-PR1, resulting in
a printer malfunction to be mistakenly recognized and an error to be displayed.
GB
15

Publicité

Chapitres

Table des Matières
loading

Table des Matières