Publicité
Les langues disponibles
Les langues disponibles
BSD blind spot detection System
Product overview
The main function of BSD blind spot monitoring is to eliminate the driver's visual blind area, reduce
rear-end collision, shaving and side collision, reduce property losses and avoid casualties.
In a narrow sense, the driver's rearview blind area refers to the angle position that can not be seen
through the rearview mirror on the left, right and in the car, which is generally in the adjacent lane, with
the driver's shoulder level, extending about 3-5 meters backward.
In a broad sense, the blind area refers to all the areas which can not be observed during the driving
process, including the blind area in front of the car, on both sides of the car and in the rear of the car.
Among them, the blind area of vehicle tail is the most dangerous area which caused majority of traffic
accidents.
BSD Blind Spot Monitoring System Operating principle
Through two hidden detection systems installed at the rear of the car, the system accurately locates
and locks all targets approaching from the rear, including vehicles, pedestrians and so on, and sends
a light warning to the driver. If the driver operates the steering light for the diversion, the system will
make a strong alarm at the same time. Alarm and lighting flashing warning.
Blind spot zone
Mirror vision
Microwave radar
Mirror vision
Blind spot zone
30
Publicité
