Cleaning The Air Filter - Sony VPL-PX11 Mode D'emploi

Notes
• Be sure to use an LMP-P202 Projector Lamp for
replacement. If you use lamps other than the LMP-
P202, the projector may malfunction.
• Be sure to turn off the projector and unplug the
power cord before replacing the lamp.
• Do not put your hands into the lamp replacement
socket, and do not allow any liquid or objects to fall
into it to avoid electrical shock or fire.
Disposal of a used projector lamp
As the materials used in this lamp are similar to those
of a fluorescent lamp, you should dispose of a used
projector lamp in the same way as a fluorescent lamp.

Cleaning the Air Filter

The air filter should be cleaned every 300 hours.
When it becomes difficult to remove the dust from the
filter, replace the filter with a new one.
To clean the air filter, follow the steps below:
1
Turn off the power and unplug the power cord.
2
Remove the air filter cover at the bottom of the
projector.
3
Remove the air filter.
4
Wash the air filter with a mild detergent solution
and dry it in a shaded place.
5
Hook the air filter on the holders of the air filter
cover, then set the filter and replace the cover.
Notes
• If the dust cannot be removed from the air filter,
replace the air filter with the supplied new one.
• Be sure to attach the air filter cover firmly; the power
cannot be turned on if it is not closed securely.
• Place the air filter so that it fits in a notch on the air
filter cover.
To clean the ventilation holes
When you clean the air filter, clean the ventilation
holes (intake, rear and bottom) also. Remove the dust
from the outside of the ventilation holes with a
vacuum cleaner.
Maintenance
33
(GB)