Sony VPL-PX11 Mode D'emploi page 16

Connecting the Projector
1)
To connect an IBM
computer
When you use a USB mouse
Left side
AUDIO MONITOR
OUTPUT REMOTE
AUDIO INPUT B RGB USB AUDIO
USB cable
A type – B
type
(supplied)
to USB
connector
Computer
a) Use a cable with no resistance.
.........................................................................................................................................................................................................
®
1) IBM and PC/AT are a trademark and a registered trademark of International Business Machines Corporation, U.S.A.
2) Macintosh is a registered trademark of Apple Computer, Inc.
16
(GB)
1)
PC/AT compatible
RS-232C AUDIO
S VIDEO
VIDEO IN
VIDEO
~
AC IN
INPUT A RGB
Stereo HD D-sub 15-pin
audio
cable (supplied)
connecting
a)
cable (not
supplied)
to audio to monitor
output
output
On the USB function
When connecting the projector to a computer using
the USB cable for the first time, the computer
recognizes the following devices automatically.
1 USB hub (general use)
2 USB human interface device (wireless mouse
function)
3 USB human interface device (projector control
function)
Recommended operating environment
When you use the USB function, connect your
computer as illustrated in the box on the left.
This application software and the USB function can
be used on a computer loaded with Windows 98,
Windows 98 SE, Windows 2000 or Windows XP.
Notes
• The projector recognizes the USB mouse when the
computer is connected to the USB connector.
• Your computer may not start correctly when
connected to the projector via the USB cable. In this
case, disconnect the USB cable, restart the computer,
then connect the computer to the projector using the
USB cable.
• This projector is not guaranteed for suspend or
standby mode. When you use the projector in
suspend or standby mode, disconnect the projector
from the USB port on the computer.
• Operations are not guaranteed for all the
recommended computer environments.
To connect a Macintosh
When connecting a video output connector that has a
two-line pin configuration, use the appropriate adaptor
for that type of connector (not supplied). If your
Macintosh supports a USB function, you can use the
wireless mouse function by connecting a USB cable.
2)
computer