JVC KD-AR600 Manuel D'instructions page 31

When attaching the plate cover
Protruding parts
Ensure the two protruding parts at the bottom
of the plate cover are inserted into the two
openings on the control panel, as illustrated.
Notes:
• Be sure to keep the hex screwdriver for future use.
• Two spare screws for the plate cover attachment are
provided with the unit. See the Installation/
Connection Manual (separate volume).
• When you attach the plate cover, do not tighten the
screws too hard; otherwise, the plate cover might be
cracked.
Openings
How to use the cutout plates
1
Unfold the supplied cutout plates.
2
Cut the plates out using a scissors.
3
Trim out the window and two knobs using
a knife on a rubber mat.
31