Lcd Screen (Color And Advanced) - Quickie QM-710 Mode D'emploi

Masquer les pouces Voir aussi pour QM-710:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Q M- 7 10/7 15HD/ 72 0
E. LCD SCREEN (color and advanced)
This section covers those joystick modules that are fitted with a color LCD screen. The
color LCD screen is split into three areas of information. The Top Bar, the Text Bar and
the Main Screen Area.
1. TOP BAR (A)
23
Battery Indicator:
Displays the charge available in the battery and alerts the user when the charge level is low.
Steady: Indicates that all is well.
Flashing Slowly: The control system is functioning correctly, but you should charge the
battery as soon as possible.
Stepping Up: The wheelchair batteries are being charged. You will not be able to drive
the wheelchair until the charger is disconnected and you have switched the control
system off and on again.
If the battery gauge shows red, yellow and green, the batteries are charged (bars 1-
10).
If the battery gauge shows just red and yellow, then you should charge the batteries
as soon as you can (bars 1-7).
If the battery gauge shows just red, then you should charge the batteries immediately
(bars 1-3).
2. MAIN DRIVE SCREEN (B) (color and advanced)
24
Profile Name
A text string that displays the name of the currently selected profile.
Clock
25
Displays the current time in a numeric format.
Color Joystick Speed Display
Gives a proportional display of the wheelchair's speed.
Maximum Speed Indicator
27
Displays the current maximum speed setting.
Digital Speed Display
28
Displays the actual speed of the wheelchair derived from the motors.
Advanced Joystick Speed Display
Gives a proportional display of the wheelchair's speed.
30
Odometer
Displays the distance driven by the wheelchair. The display can show either the total dis-
tance or the trip distance, in miles or kilometers. The Settings Menu contains an option that
sets whether the trip or total distance is displayed, as well as a facility to reset the trip dis-
tance. If Latched operation is active, then that symbol will take priority over the odometer.
Advanced Joystick Max speed indicator
Displays the current maximum speed setting.
3. TEXT BAR (C) (color Joystick)
22
Current Profile
The currently selected profile is shown in numeric form or may be displayed as text.
Temperature warnings may also be displayed on this bar.
MK-100158 Rev. F
22
26
29
31
IX. CONTROLS, JOYSTICKS & OPERATING GUIDES
20
Indoor-drive
14:35
Color
1.55 mph
Advanced
999 m
22
23
24
25
26
27
28
29
30
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Qm-715hdQm-720

Table des Matières