EMAK 91 Manuel D'utilisation page 57

CONTROLS AND INSTRUMENTS
Mechanical transmission
4.21 CLUTCH / BRAKE PEDAL
This pedal has two functions: during the first part of its travel it acts as a clutch,
engaging and disengaging drive to the wheels, and in the second part it acts as a
brake on the rear wheels
IMPORTANT
disengagement, as this can cause overheating and damage the transmission belt.
NOTE
4.22 SPEED CHANGE LEVER
This lever has seven positions for the 5 forward speeds, the neutral position «N»,
and reverse «R».
To go from one speed to another, press the pedal (4.21) halfway and shift the lever
as shown on the label.
WARNING!
!
moving.
Do not keep the pedal halfway between clutch engagement or
When the machine is moving, keep your foot off the pedal.
Only shift into reverse when the machine has stopped
4.21
4.22
R N
1
2
3
4
5
15
EN