EMAK 91 Manuel D'utilisation page 73

MAINTENANCE
1)
See the engine manual for the full list and frequency.
2)
At the first signs of wear, contact your dealer to replace the part.
3)
General lubrication of all joints should also be carried out whenever the machine is
to be left unused for a long period.
The above table is there to help you maintain your machine's safety and performance.
It shows the main maintenance and lubrication operations and their frequency. To the
right of each item, there is a box where you can write the date or after how many oper-
ating hours the work was carried out.
WARNING!
!
chapters 6.3 and 6.4 of this manual must be carried out by your Dealer or a
specialized Service Centre. Both have the necessary knowledge and tools to
ensure that the work is carried out correctly without affecting the safety of the
machine.
6.2.1 Summary of main situations where servicing operation may be required
Whenever ...
The blades vibrate
The blades tear the grass and the lawn
becomes yellow
The cut is uneven
The blades engage in an abnormal way
The machine does not brake
Forward movement is erratic
6.2.2 Engine
IMPORTANT
tions in the engine manual.
To empty the engine oil, unscrew the oil plug
(1). When refitting the plug, make sure the
seal is positioned correctly.
All checks, adjustments and replacements not described in
You will need to ...
Contact Your Dealer
Contact Your Dealer
Align the cutting deck (
Contact Your Dealer
Contact Your Dealer
Contact Your Dealer
Follow all the instruc-
6.3.1).
1
31
EN