Maintenance; Safety Recommendations; Programmed Maintenance - EMAK 91 Manuel D'utilisation

30
EN

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

WARNING!
!
ignition key and read the relevant instructions. Wear adequate clothing and
work gloves whenever your hands are at risk.
WARNING!
!
or worn-out parts must always be replaced and not repaired. Only use original
spare parts: Parts that are not of the same quality can damage the equipment
and affect your safety and that of others.
IMPORTANT
unauthorised places!

6.2 PROGRAMMED MAINTENANCE

Operation
1. MACHINE
1.1 Check of fastening and sharpness of blades
1.2 Blade replacement
1.3 Transmission belt check
1.4 Transmission belt replacement
1.5 Blade belt check
1.6 Blade belt replacement
1.7 Drive adjustment and check
1.8 Blade brake and engagement check
1.9 Bolt and screw check
1.10 General lubrication
1)
2. ENGINE
2.1 Engine oil change
2.2 Air filter cleaning and check
2.3 Air filter replacement
2.4 Fuel filter check
2.5 Fuel filter replacement
2.6 Spark plug contacts check and cleaning
2.7 Spark plug replacement
Before cleaning or doing maintenance work, take out the
Never use the machine with worn or damaged parts. Faulty
Never dispose of used oil, fuel, batteries or other pollutants in
2)
2)
3)
Hours Completed (Date or Time)
25
100
25
–
25
–
10
10
25
25
.....
.....
.....
.....
.....
.....
.....
MAINTENANCE