Operating Manual - Cherry KW 6000 Mode D'emploi

OPERATING MANUAL

CHERRY KW 6000 // Bluetooth keyboard for Apple iPad
Congratulations ...
CHERRY has been developing and produc-
ing innovative input systems for comput-
ers since 1967. You will now be able to
feel the difference in quality, reliability and
design with your new favorite piece of
equipment.
Always order original CHERRY equipment.
For information on additional products,
downloads, and much more, please visit
www.cherry.de
The following features in particular set your
CHERRY KW 6000 apart:
• Ultra-flat, ultra-compact
• Bluetooth
• Can be charged via USB
1 Making a connection to the
keyboard
The keyboard is compatible with the iPad.
1.1 Connecting for the first time
Before using the keyboard for the first
time, the keyboard must be "introduced" to
the iPad (initial connection).
1 Before using the keyboard for the first
time, charge it for at least 10 minutes
(see 2 "Charging the battery").
2 Activate Bluetooth on the iPad under
Settings > General > Activate Blue-
tooth.
3 On the back of the keyboard, set the
on/off switch to ON.
The keyboard's connection status LED
glows blue for 5 seconds.
4 Press the connect button on the back
of the keyboard.
The keyboard's connection status LED
flashes blue during the connection
process.
When the iPad recognizes the key-
board, it displays the Bluetooth Key-
board field.
5 Press on the Bluetooth Keyboard
field.
The Bluetooth Keyboard wants to
connect to your iPad field appears,
requesting you to enter a verification
code.
6 Enter the code on the keyboard and
confirm with Enter.
The keyboard is connected with the
iPad.
1.2 Connecting again
If the keyboard has been switched off or
Bluetooth has been deactivated on the
iPad, proceed as follows:
1 Activate Bluetooth on the iPad under
Settings > General > Activate Blue-
tooth.
2 On the back of the keyboard, set the
on/off switch to ON.
The keyboard's connection status LED
glows blue during the connection
process.
When the iPad recognizes the key-
board, it displays the Bluetooth Key-
board field. The connection status
should display Connected.
In case Not connected appears in the
display:
Press on the Bluetooth Keyboard –
Not connected field.
The Bluetooth Keyboard – Con-
nected display appears.
9