Operating Manual; Status Displays - Cherry MultiBoards G80-7 Série Mode D'emploi

OPERATING MANUAL

CHERRY MultiBoards G80-7xxx/-8xxx – Programmable Keyboards with Card Reader
Congratulations ...
CHERRY has developed and produced
innovative input systems for computers since
1967. You can now experience the difference in
quality, reliability and design with your new
favorite accessory.
Always insist on original CHERRY products...
GB
For information on other products, downloads
and much more, visit us at
www.cherry-world.com.
Your CHERRY MultiBoard stands out especially
due to the following features:
• CHERRY MX key technology with Gold
Crosspoint contacts
• Robust and reliable
• Fully programmable USB 2.0 keyboard via
the software CHERRY Tools
• Programming can be selected – manually or
via software macros
• UnifiedPOS supported (OPOS/JavaPOS)
• Integrated memory
• Provision of statistics data via WMI (Windows
Management Instrumentation)
Alongside the functions of a standard
keyboard, the MultiBoard keyboards offer the
following additional functions depending on the
model:
• Magnetic card reader
• PC/SC smartcard reader (EMV 2000
approved)
8
• Touchpad
• Additional keys (extended layout)
• Inscribable keys

1 Status displays

The left and center LEDs show the status of the
Caps Lock key, Num-Lock key and the shift
key.
The right LED shows the status of the scroll
key or has different functions depending on the
model as outlined below:
1.1 Models with magnetic card
reader
LED () Function
Lights up green for The magnetic card
approx. 4 sec. (after reader is ready to
connecting or operate on the hardware
switching on the PC) side.
Lights up green The magnetic card has
(after the magnetic been read correctly.
card has been Configuration via
swiped through) CHERRY Tools: On/Off
and light-up duration
(Standard: On, 200 ms).
1.2 Models with smartcard
reader,
models with smartcard and
magnetic card reader
LED ( ) Function
Lights up green The smartcard reader is
constantly (after ready to operate on the
connecting or hardware side.
switching on the PC)
Flashes red Communication with the
smartcard.
2 Keyboard connection
2.1 Models with smartcard reader
• Only insert the USB connector in a USB hub,
which supplies 500mA electricity, or the
USB root hub (system USB connection).
2.2 Further models
• Insert the USB connector in any USB
connection in your system.