Equalizer Screen - Audiovox VMO 5020 V Mode D'emploi

EQUALIZER SCREEN

The Equalizer Screen features a 9-band
graphic equalizer that allows you to easily
adjust your audio system to meet the
acoustical characteristics of your vehicle.
The acoustical characteristics vary
depending on the type of vehicle and its
measurements.
Back Icon:
Press this icon to return to the current
source.
Mute Indicator:
This indicator is displayed when the
volume is muted.
Time Display:
This indicator displays the time as
entered by the user in the Settings Menu.
9-Band Graphic Equalizer:
You can manually adjust the 63Hz,
125Hz, 250Hz, 500Hz, 1KHz, 2KHz,
4KHz, 8KHZ or 18KHz frequency band
audio levels. Press and hold the up or
down cursor icons to move the highlight
on the frequency to be adjusted to a
positive or negative value. The audio
level values range from -12 to +12.
Classical, Pop, and Flat Icons:
Press the Classical, Pop or Flat icons
to apply a preset equalization level to
the unit's audio output signal. When the
equalizer is set to a preset level, the
9-Band Graphic Equalizer audio levels
cannot be changed.
User 1, User 2, and User 3 Icons:
Press the User 1, User 2 or User 3 icons
to apply a user-defined equalization level
to the unit's audio output.
To set a user-defined level:
1. Use the 9-Band Graphic Equalizer to
adjust audio output levels.
2. Press and hold the User 1, User 2 or
User 3 icon until the icon lights.
3. Release the icon. The user-defined
value is now stored.
109