Touch Screen Calibration; Information Screen - Audiovox VMO 5020 V Mode D'emploi

TOUCH SCREEN CALIBRATION

The Touch Screen Calibration adjustment
is used to set the parameters of the touch
screen to ensure that when the screen is
pressed, it corresponds to the feature that
you are selecting.
NOTE: Never use a pen or sharp object
to calibrate the touch screen as
this will damage the panel.
To calibrate the touch screen:
1. Press the Touch Screen Calibrate
icon. The following screen will appear:
2. Follow the instructions on the screen.
Press and briefly hold your finger or
a stylus to the center of the target.
Repeat as the target moves to each
corner of the screen and finally to
the center. The following screen will
appear:
3. If the screen is pressed, the new
calibration parameters will be
accepted. If the screen is not pressed
within thirty seconds, the new
parameters will be disregarded.

INFORMATION SCREEN

The Information Screen displays the
unit's current software version and
Bluetooth version numbers.
Back Icon:
Press this icon to return to the First
Settings Screen.
105