Trouble Shooting; Environmental Protection; Accessories - Jet JDS-12X-M Mode D'emploi

9. Trouble shooting
Motor fails to develop full power
*Power line overloaded‐
Correct overload condition.
*Undersized wires in power supply system‐
Increase supply wire size.
Motor stalls or doesn't start
*No electricity‐
check mains and fuse.
*Defective switch, motor or cord‐
consult an electrician.
*Feed pressure too high
Machine vibrates excessively
*Stands on uneven surface‐
adjust stand for even support.
*Workpiece is not properly supported
*Table mounting fasteners are loose
Sanded surface is not square
*Table not square to sanding disc‐
Use a square to adjust the table.
Sanding marks on wood
*Workpiece held still‐
Keep workpiece moving.
*Wrong grit sanding disc
*Feed pressure too high
10. Environmental protection
Protect the environment.
Your appliance contains valuable materials which can be
recovered or recycled. Please leave it at a specialized institution.
This symbol indicates separate collection for electrical and
electronic equipment required under the WEEE Directive
(Directive 2012/19/EC) and is effective only within the European
Union.
11. Accessories
Article Number: 60‐0505
Abrasive cleaning stick
Refer to the JET‐Pricelist for various grit abrasive discs.