Cleaning And Maintaining The Milk System - Delta Q MILKQOOL Manuel D'utilisation

EN INSTRUCTIONS AND MODE OF USE
72
Fig. 28: Adjust the selector to the
Cleaning Position.
Fig. 29: Fill a container with 120ml of
clean water.
A. B. C.
Fig. 30: The milk system cleaning.

CLEANING AND MAINTAINING THE MILK SYSTEM

Rinsing the milk system
• Adjust the selector to the Cleaning Position, place a tall glass (with
capacity exceeding 190cc) under the extraction nozzle (see Fig. 28).
• Connect the milk suction tube to the milk system (see Fig. 24).
• Fill a container with 120ml of clean water. Immerse the milk suction
tube in the container (see Fig. 29).
• Press the Milk-based beverage button and the milk-based beverage
button will turn red (see Fig. 30).
• The milk system cleaning process begins when hot water and steam
come out. The drying process lasts for about 1 minute.
The machine stops automatically.
D.