Programming The Coffee/Galão Amount - Delta Q MILKQOOL Manuel D'utilisation

EN INSTRUCTIONS AND MODE OF USE
70
Fig. 25: Adjust the selector to the
Galão position.
A. B. C.
Fig. 26: Hold the Milk-based beverage
button.
PROGRAMMING THE COFFEE/GALÃO AMOUNT
• Adjust the selector to the Galão position (see Fig. 25).
• Raise the lever completely and insert a Delta Q coffee capsule in the
capsule holder aperture, arranged in accordance with the aperture
silhouette. Lower the lever completely (see Fig. 9).
Place a cup of Galão under the extraction beak.
• Hold the Milk-based beverage button for 6 seconds, and the Espresso,
Long coffee and Infusion buttons blinks (see Fig. 26).
D.
• Press the Milk-based beverage button again, thus beginning the
coffee extraction and when the extraction reaches the intended dose
press the Milk-based beverage button again.
The machine memorises this volume and will start extracting it until a
new programme is set.
• Afterwards, the machine pre-heats (approximately 25"). When the
machine reaches the temperature, the milk extraction begins and
when the desired amount is reached press the Milk-based beverage
button again.
The machine memorises this volume and will start extracting it until a
new programme is set.
Note: The programmable maximum volume of the beverage is 220cc.