Delta Q MILKQOOL Manuel D'utilisation page 65

A. B. C.
A. B. C.
Fig. 17: Programming the long coffee
extraction button.
Programming the long coffee extraction button.
Note: The pre-defined factory volume for the long coffee extraction
button is around 45cc.
• T o alter the volume of your beverage, ensure the machine is ON (see Fig.5),
check whether there is any water in the water tank and wait until the
control panel buttons indicate "Ready to use" (see Fig. 7).
• Then press the long coffee extraction button until the indicator lights of
the espresso and the tea extraction buttons start blinking.
D.
Press the long coffee extraction button (see Fig. 17).
The indicator lights of the espresso and the tea extraction buttons go
out.
D.
Note: If the user does not press again the long coffee extraction button
after 1 minute, the equipment will revert automatically to the "Ready to use"
mode.
• As soon as extraction has reached the desired dosage, press the long
coffee extraction button again and the operation is complete.
The equipment memorises this volume and will start extracting it until
new programming has been defined.
• After completing extraction, the equipment returns to "Ready to use"
mode (see Fig. 7).
Note: If the user fails to press the extraction button to complete the
operation, the equipment will automatically assume the maximum
volume around of 75cc.
MILKQOOL
65