Stand By Mode - Delta Q MILKQOOL Manuel D'utilisation

Fig. 15: Stand by mode.

Stand by Mode

Whenever the equipment is idle for over 10 minutes, it enters "Stand by"
mode. All button indicator lights on the control panel go out, with the
exception of the Delta Q logotype, which will remain in the Breathing
Light Effect mode (see Fig. 15).
• When the user presses any extraction button again, the equipment
leaves Stand by mode, restarts the heating process and returns to the
"Ready to use" mode in approximately 1 minute (see Fig. 7).
MILKQOOL
63