Standby Mode; Cleaning And Maintenance - Delta Q QOOL Automática Manuel D'utilisation

STAND BY MODE
Whenever the equipment is idle for over 10 minutes, it enters "Stand by" mode.
The boiler is turned off and the external surface of the machine cools down.
The power LED will illuminate red light (14).
When the user press extraction button again, the equipment leaves Stand by mode,
restarts the heating process.

CLEANING AND MAINTENANCE

Before doing any cleaning, ALWAYS disconnect
the plug (9) from the power socket.
• Use a damp cloth to clean the body of the machine (1)
and do not use abrasive detergents.
Never immerse the machine body (1) in
water or other liquids.
DO NOT wash any machine components
in the washing machine.
• Remove the grid (7) and the drawer (6), empty
any capsules and wash them with an ordinary
dishwashing detergent.
• Periodically remove the water tank (2) and rinse
it with clean water then put it back properly in
its place.
INSTRUCTIONS FOR USE
EN
57