Intended Use; Technical Data; Before Starting The Equipment - EINHELL BT-CS 860 L Mode D'emploi D'origine

Anleitung_BT_CS_860_L_SPK7:_

3. Intended use

The mini hand-held circular saw is designed for
sawing straight cuts in wood, wood-type materials
and plastics, as well as for cutting tiles using the
appropriate saw blade or cutting wheel.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: 230-240 V ~ 50 Hz
Power input:
Idling speed: 6,000 min
Cutting depth: max. 23 mm
Saw blade:
Blade holder:
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level 89.4 dB(A)
pA
K uncertainty
pA
L sound power level 100.4 dB(A)
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Handle
Vibration emission value a = 2.085 m/s 2
h
K uncertainty = 1.5 m/s 2
28.02.2012 14:28 Uhr
Additional information for electric power tools
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with another electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Reduce noise generation and vibration to a
minimum!
Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves.
450 W
Hold the equipment by the insulated handles
-1
when carrying out work during which the plug-in
tool could strike concealed power cables or its
own mains lead. Contact with a live cable may also
Ø 85 mm
make the metal parts of the equipment live and cause
Ø 10 mm
an electric shock.
II / ®
Residual risks
2.0 kg
Even if you use this electric power tool in
accordance to instructions, certain residual risks
cannot be eliminated. The following hazards may
arise in connection with the equipment's
construction and layout:
1. Lung damage if no suitable protective dust mask
is applied.
2. Damage to hearing if no suitable ear protection is
applied.
3. Health damage caused by hand-arm vibrations if
3 dB
the equipment is used over a longer period or is
not properly guided and maintained.
3 dB

5. Before starting the equipment

Before you connect the equipment to the power
supply make sure that the data on the rating plate are
identical to the supply voltage.
Always pull out the power plug before making
adjustments to the equipment.
Seite 15
GB
15