Connection And Assembly Of The Prestomat Printer; Description Of The Individual Components - DeguDent Prestomat Compact Mode D'emploi

3.2 Connection and assembly of the Prestomat Printer

The serial port (P) for the connection of the printer is located at the right side of the housing. The printer is
attached into the openings on the right side of the housing and fixed with the screwing located at the
printer. For programming of the printer please refer to the Prestomat Printer operating instructions.

4 Description of the individual components

In order to open the lid of the casting chamber (F), move the locking lever upward. In order to close the
lid, move the locking lever (G) downward until it locks.
26
A) Safety valve
B) Compressed air connection
C) Moisture separator
!
Caution:
Power is supplied to the printer via the
serial port. Therefore do not connect any
commercially available printer to the
Prestomat compact since this may result
in damage to the units !