Troubleshooting - SilverCrest SNS 45 B4 Mode D'emploi

Undo the screw with a Phillips screwdriver.
Remove the front cover.
Pull out the transparent protective disc.
You can now carefully pull the defective UV lamp out of its socket.
Insert the new UV lamp into the socket.
Push the transparent protective disc back into the slot.
Push the front cover back onto the appliance and fix it into place with the
screw.
Push the base plate back into the appliance.

Troubleshooting

In this chapter you will receive important information for malfunction localization
and remedies. Observe the instructions in order to avoid risks and damage.
■ 62 │ GB │ IE
SNS 45 B4