HBM PACEline CMD600 Manuel D'emploi page 6

6
CMD600
When devices are working in a network, these networks must be designed in
such a way that malfunctions in individual nodes can be detected and shut
down.
Safety precautions must be taken both in terms of hardware and software, so
that a line break or other interruptions to signal transmission, such as via the
bus interfaces, do not cause undefined states or loss of data in the
automation device.
General dangers of failing to follow the safety instructions
The CMD600 charge amplifier corresponds to the state of the art and is
failsafe.
The amplifier can give rise to remaining dangers if it is inappropriately
installed and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of a charge amplifier must have read and understood the mounting
instructions and in particular the technical safety instructions.
Conditions at the place of installation
Protect the charge amplifier from moisture and dampness or weather
conditions such as rain, snow, ice and salt water.
As specified in EN 61326−1, Section 3.6, the connecting cables of the
CMD600 charge amplifier must be no longer than 30 m (when laid within a
building) and must not leave the building.
Maintenance
The CMD600 charge amplifier is maintenance-free.
Residual risks
The scope of supply and performance of the charge amplifier covers only a
small area of measurement technology. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of measurement technology in such a way as to
minimize remaining dangers. Prevailing regulations must be complied with at
all times. There must be reference to the remaining dangers connected with
measurement technology. After making settings and carrying out activities that
are password-protected, you must make sure that any controls that may be
connected remain in safe condition until the switching performance of the
amplifier system has been tested.
A2781−2.1 en/de/fr