Filters State Indication; User-Menü - GUTMANN VIENTO Mode D'emploi

OPERATION MANUAL

4.30 Filters state indication

-
-
4.31 User menu
1. Precondition: the hob is switched off.
2. Pause key starts pulsating (for 60 sec max).
3. Press and hold down pulsating Pause key and
4. Select the menu item which you want to dis-
5. To change the menu item's value, select the
6. To exit the User Menu touch the power key for
The hob touch control includes a filter timer of
40 hours that remember that is important to
clean the hood's grease filter on a regular ba-
sis.
The filter run time is always counted when the
fan is running - even during the after- run. Af-
ter the time has elapsed a flashing
played on the fan power setting display.
During after-run the
again when the hob is switched on. The filter
display can either be acknowledged or reset:
Short press on fan power setting display me-
ans acknowledgment.
Display appears only after switching the hob
off and on again.
Long press for 3 sec causes time reset.
A confirmation tone will appear and the F will
be displayed statically for 2 sec before the
standard display returns.
User menu is intended for end customer to
adapt the Touch Control to his personal
needs. The available items are described in
the table below.
Touch ON/OFF key to power up the Touch
Control. Touch the ON/OFF key again within 3
sec to set the Touch Control to standby mode
again.
The menu is automatically exited after that.
press all cooking zone in clockwise direction
as shown, starting with the left front cooking
zone. User menu is active. The rear left coo-
king zone display shows the selected user
menu section.
play/change via the slider control. The value
for the selected item is displayed on the front
left cooking zone display
menu item value by touching the front left
cooking zone. The selected menu item value
is displayed by full brightness; the other dis-
plays are dimmed down. Choose the menu
item's value by the slider control via direct sel-
ection.
2 seconds. The User meu will be exited. The
changes will be saved.
is dis-
is not shown. It pops up
EN
63