Fan After - Run; Fan Timer - GUTMANN VIENTO Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
EN
62
OPERATION MANUAL - FAN

4.28 Fan after - run

The system has a follow- up / after- run
function, which should ensure that any exis-
ting odours and steam can be extracted.
After completing the cooking process and
switching off the hob, the fan continues to
run.
There is an automatic after- run of 5 minu-
tes on level 1
Notes
-
The fan after- run is indicated by a pulsa-
ting dot in the fan power setting display.
-
When the automatic mode is active,
remains in the display. In manual mode the
after- run level 1 is displayed.
0.
To cancel ( or to change the level ) the after
-run , touch the fan display ( pos. 13* ) and
move the slider to 0 ( or 1 - 9 ).

4.29 Fan timer

There is the possibility to set a fan timer
analogue to the cooking zone timer. The ti-
mer is displayed on the timer display.
The fan timer does not start to run until the
cooking process has finished.
1. Precondition: Fan is active.
2. Select the fan power setting display. Timer
indication displays shows "---". Press the ti-
mer displays.
3. Then use the Plus key or the Minus key to
set the required time.
The timer symbol of the fan lights up.
Notes
The following situations can occur:
Situation1
-
Fan level set, fan timer set, all cooking zo-
nes are switched off
-
Hob remains on ; fan level remains active
for timer
-
Then the hob switches off completely
Situation2
-
Fan level set, timer set; hob switched off via
ON/OFF key
-
After-run level 1 is set and remains active
for the timer setting time.
-
Then the hob switches off completely.
Timer can be set as soon as the fan is running
and starts to run as soon as all cooking zones
are off.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2900 ml

Table des Matières