Technical Data - AYA ADV2S/2 Manuel D'utilisation

Important!
The inside of the hob should only be washed with warm water and a small
amount of washing-up liquid.
Caution!
Ensure the heating plate is clean-a soiled zone does not transfer all of the
heat.
Protect the hob against corrosion.
Switch off the hob against corrosion.
Do not leave pans with prepared dishes based on fats and oils unattended
on the switched-on plate; hot fat can spontaneously catch fire.
IMPORTANT: If your appliance appears not to be operating correctly,
Please contact with dealer.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
Please note that if an engineer is asked to attend whilst the product is under
guarantee and finds that the problem is not the result of an appliance fault,
then you may be liable for the cost of the call out charge.
The appliance must be accessible for the engineer to perform any
necessary repair. If your appliance is installed in such a way that an
engineer is concerned that damage will be caused to the appliance or your
kitchen, then he will not complete a repair.

TECHNICAL DATA

Rated Voltage: 220 – 240 V~, 50 - 60 Hz
Supply Connection: 16 A (double pole switched fused outlet with 3mm
contact gap)
Max Rated Inputs: 3.0 kW
Energy information
EN-23