AYA ADV2S/2 Manuel D'utilisation page 50

If you want to cancel the timing, you can adjust the timing time to zero.

The first time you press the plus button"

minute, after which you can press the plus or minus button to adjust the
timing time.
Press the plus button"

the heating time will be increased by 1 minute. The timing will be
continuously changed between 1-99minutes . The maximum
adjustment to 99 minutes;
Press the minus button "

and the timing will be reduced by 1 minute.
After the timer countdown is 0, the buzzer will continue to sound for 2

minutes, and you can press any button to turn off the beep.
Power off
Under standby mode or heating mode, long press "
audible signal will be heard,the appliance will go into power off mode. If the
corresponding cooking zone surface has residual heat at this time, the
digital tube of power level indicator will flash display " ",and indicate
residual heat warning.
Child Safety lock button
The control panel can be locked by pressing and holding the child

safety lock button"
standby status or heating status.The safety lock icon will display.When
the appliance switch off the safety lock icon will extinguish.
Under the child safety lock mode, the "

flash(1s/time).If the cooking zone has set the time,the digital tube will
" for each time, the buzzer will beep once, and
" for each time, the buzzer will beep once,
" for 3 seconds whilst the appliance is under
EN-17
", the timing starts from 1
" button for 3s, a short
" will display and