AYA ADV2S/2 Manuel D'utilisation page 48

6.2 Press plus button to set the power to level 9, then touch plus button "
to let the power level alternately display " " and " ".At this point, the
default timing has started.For example, after " " and " "alternately
display for 10 seconds ,press the"
icons " " and " " will display for 2 minutes and 20 seconds.After 2 minutes
and 20 seconds, the hob will turn to normal heating mode , corresponding
power level indicating digital tube will display " ".
When setting the automatic heating function, the corresponding cooking
zone will be heated in level 9 for a period of time (heating time depends on
the subsequent reduction to several levels, the heating time of each level is
as follows) , then continue working in the final adjusted heating level. For
example, set the heating level to 9th level and activate the automatic
heating function by pressing the "
set the automatic heating function level to level 6 by minus button "
this setting, the cooking zone is heated by level 9 for 2.5 minutes. The
cooking zone indicating digital tube is alternately display " " and " ".
Then continue heating at level 6, the digital tube will display " ".
6.3 The power level and time corresponding tables of auto-heating are as
below:
Power Level
Fast-heating
time（min）
6.4 Automatic heating level adjustment : When entering automatic heating
mode ,only if auto-heating at max power within 30s,press minus button"
can reduce the power. After more than 30 seconds, pressing the minus
button" "can not reduce the automatic heating level, it will exit the auto-
heating mode.
After more than 30 seconds, as long as it is still in the automatic heating
mode and the automatic heating level is less than 9th level, press the plus
button" " to increase the automatic heating level, and the system
continues to be in the automatic heating mode.
1 2 3
1 3 4.8
" to adjust the power level to level 6. The
" key (alternately display " " " ").Then
4 5
6.5 8.5
EN-15
6 7 8
2.5 3.5 4.5
"
". In
9
5
"