Remote Control; Using The Stationary Air Conditioner - Dometic WAECO CoolAir CA8505 Notice D'utilisation

CoolAir
5.3

Remote control

The remote control is equipped with the following control elements for
operating the system:
No. in fig. 3,
page 4
1
2
3
4
5
6

Using the stationary air conditioner

Caution
a
The manufacturer assumes no liability for non-observance of this
operating manual, in particular for any consequential damage,
especially consequential damage caused by failure of the station-
ary air conditioner.
Caution
a
Do not insert foreign objects into the system.
Meaning
STANDBY button
The system can be switched between active and standby
modes.
Temperature – button:
The temperature – button decreases the temperature by 1 °C or
the timer running time by 10 minutes.
Temperature + button:
The temperature + button increases the temperature by 1 °C or
the timer running time by 10 minutes.
Mode – button:
The operating mode – button switches to the next mode down.
Mode + button:
The operating mode + button switches to the next mode up.
Using the stationary air conditioner
27