Renkforce 754389 Notice D'emploi page 51

40 2 #
5 #
72 0 #
2  #
*
Relay output is activated for 2 seconds at correct
user code
Access lock is to work in toggle operation at
correct code (the access lock is activated or
deactivated at very input of the code)
Code lock is locked for 15 minutes after 10 wrong
code inputs
Activate „Auto-Entry" functions
Attention - as described at first, all codes must
be equally long, e.g. 5-digit)
Terminate programming mode; then the yellow
LED flashes slowly (standby)
51