Intended Use; Explanation Of Symbols - Renkforce 754389 Notice D'emploi

2. Intended Use

This code lock is designed to secure doors against unauthorised entry (e.g. an office).
You can save up to 100 users with different codes.
An access lock (either 1...999 seconds or switching operation on/off) prevents unauthorised
access (e.g. to meetings or at night).
A relay output (1x switching contact, max. 28 V, 5 A) can be used to control a door opener
or other devices (e.g. an alarm system).
The code lock must only be operated with a voltage of 12 - 24 V/DC or 12 - 24 V/AC.
Operation of the code lock is only permitted in dry, closed rooms. The product must not
get damp or wet.
The entire product must not be modified or converted. Always observe the safety infor-
mation included in these operating instructions.
Any use other than the intended use described above is forbidden and may harm the
product and result in short circuit, fire, electric shock, etc.

3. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where there is a health
hazard, e.g. from electric shock.
An exclamation mark in a triangle indicates important notes in these operating
instructions that must be strictly observed.
The „arrow" symbol indicates special information and advice on operation.
31