Reaction At Incorrect Input; Sound Signal At Relay Activation - Renkforce 754389 Notice D'emploi

52 #
+ = Toggle with quick input
If this function is selected, the access lock can be switched on with the first two digits
of the code and the button „
For deactivation of the access lock, however, the complete code must be entered
for safety reasons.
e) Reaction at Incorrect Input
70 #
+
After 10 incorrect inputs, the buttons are locked for 30 seconds.
72
+ Number of incorrect inputs 5...10 +
After a settable number of wrong inputs (5....10), the buttons are locked for 15 minu-
tes.
72
Example:
To revoke the button lock early, enter the master code (no sound is issued for this!)
and push the button „
76 00 #
+ +
For this setting, no button lock takes place at incorrect input.
f) Sound Signal at Relay Activation
  #
+ + = Sound signal 1 second
At relay activation by code input and operation of a door opening button that is con-
nected to the screw terminal „EG IN", a sound signal of 1 second is output.
This is helpful to signal opening of the door to a visitor (if the door opener makes no
sound of its own).
 0 #
+ + = 2 short sound signals
If the relay is activated by code input, two short sound signals are output.
#
".
7 #
+ + = Buttons locked after 7 wrong inputs
#
".
#
45