Safety Notes; Functional Description; Intended Use; Product Features - Bosch D-tect 150 Professional Notice Originale

OBJ_BUCH-844-006.book Page 18 Monday, August 30, 2010 10:44 AM
18 | English

Safety Notes

en
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.
For technological reasons, the measuring
tool cannot ensure 100 % certainty. To rule
out hazards, safeguard yourself each time
before drilling, sawing or routing in walls,
ceilings or floors by means of other infor-
mation sources, such as building plans, pic-
tures from the construction phase, etc. En-
vironmental influences, such as humidity or
closeness to electrical devices, can influence
the accuracy of the measuring tool. Surface
quality and condition of the walls (e.g., mois-
ture, metallic building materials, conductive
wallpaper, insulation materials, tiles) as well
as the amount, type, size and position of the
objects can lead to faulty measuring results.

Functional Description

Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.
1 609 929 X40 | (30.8.10)

Intended Use

The measuring tool is intended for detecting ob-
jects in walls, ceilings and floors. Depending on
material and condition of the structural surface,
metal objects, wooden beams, plastic pipes,
wiring and cables can be detected. For objects
detected, the allowable drilling depth to the sur-
face of the object is determined.
The measuring tool complies with the limit val-
ues according to EN 302435. Based on this, it
must be clarified whether the measuring tool
may be used in, e.g., hospitals, nuclear power
plants and in close vicinity to airports, or mobile
phone stations.

Product Features

The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Marking aid, top
2 Wheel
3 Marking aid, left and right
4 Battery lid
5 Latch of battery lid
6 Handle
7 Maintenance flap
8 Serial number
9 Sensor area
10 Selection button, right
11 Start button
Start
12 Selection button, left
13 Audio signal button
14 Setup button
Setup
15 On/Off button
16 Display
17 LED
18 Protective pouch
The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools