General Safety Rules - Bosch GLM 15 Consignes D'utilisation/De Sécurité

General Safety Rules

!
WARNING
in hazardous radiation exposure, electric shock, fire
and/or serious injury. The term "tool" in the warnings listed
below refers to your mains-operated (corded) tool or battery-
operated (cordless) tool.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The following label is on your
laser tool for your safety.
ALWAYS BE AWARE of their
location when using the tool.
DO NOT direct the laser
beam at persons or
animals and do not stare into the laser beam
yourself. This tool produces class 2 laser
radiation and complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007. This can lead to persons being blinded.
Working safely with the
measuring tool is possible
only when the operating and
safety information are read
completely and the instructions
contained therin are strictly
followed. Never make warning
labels on the Measuring tool
unrecognizable.
Never aim the beam at a
workpiece with a reflective
surface. Bright shiny reflective
sheet steel or similar reflective
surfaces are not recommended
Read all instructions. Failure to follow
all instructions listed below may result
Safety Rules
for laser use. Reflective surfaces
could direct the beam back
towards the operator.
Take care to recognize the
accuracy and range of the
device. Measurement may not be
accurate if used beyond the rated
range of the device.
Use of controls or adjustments
or performance of procedures
other than those specified
herein may result in hazardous
radiation exposure.
-6-