Maintenance And Service - Bosch GLM 15 Consignes D'utilisation/De Sécurité

Cause
Battery voltage too low
All indicators on the display flash
The measuring tool is defective.

Maintenance and Service

!
WARNING
Do not immerse the measuring tool into water or other
fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Maintain the reception lens 7 in particular, with the same
care as required for eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an authorized after-sales service center
for Bosch power tools. Do not open the measuring tool
yourself.
In all correspondence and spare parts orders, please
always include the 10-digit article number given on the type
plate of the measuring tool.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries instead of disposing
of waste. The unit, accessories, packaging & used
batteries should be sorted for environmentally friendly
recycling in accordance with the latest regulations.
Keep the measuring tool clean at all times.
-15-
Corrective Measure
Replace batteries
Contact the Customer
Service