Maintenance And Service; Maintenance And Cleaning; Spare Parts - Bosch DMF 10 Zoom PROFESSIONAL Instructions D'emploi

Masquer les pouces Voir aussi pour DMF 10 Zoom PROFESSIONAL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
OBJ_BUCH-127-002.book Page 6 Tuesday, January 8, 2008 8:37 AM

Maintenance and Service

Maintenance and Cleaning

When the measuring indicator f continuously shows an amplitude even
though there is no metal object in the vicinity of the measuring tool, the
measuring tool can be calibrated manually. For this, remove all objects
in the vicinity of the measuring tool (including wrist watches or rings of
metal) and hold the measuring tool up in the air. With the measuring tool
switched off, press both the "on/off" button 7 and the wood-detection
button 5 until the illuminated ring 1 lights up red and green at the same
time. Then release both buttons. When the calibration process was suc-
cessful, the measuring tool will start over after a few seconds and is then
ready for operation.
Wipe away debris or contamination with a dry, soft cloth. Do not use
cleaning agents or solvents.
In order not to affect the measuring function, decals/stickers or name
plates, especially metal ones, may not be attached in the sensor area 9
on the front or back side of the measuring tool.
Do not remove the felt pads 8 on the back side of the measuring tool.
Replace the felt pads when they are damaged or used. For this, com-
pletely remove the felt pads and glue the new felt pads onto the same
spots.
Store and transport the measuring tool only in the supplied protective
case.
If the measuring tool should fail despite the care taken in manufacturing
and testing procedures, repair should be carried out by an authorized
after-sales service centre for Bosch power tools.
In all correspondence and spare parts orders, please always include the
10-digit article number given on the type plate of the measuring tool.

Spare Parts

Protective case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 609 203 P19
Battery lid 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 609 203 P20
Felt pads 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 609 203 P21
Service and Customer Assistance
Exploded views and information on spare parts can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
✆ Service: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+44 (0) 18 95 / 83 87 82
✆ Advice line: . . . . . . . . . . . . . . . . . . . . . . . . . .+44 (0) 18 95 / 83 87 91
Fax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+44 (0) 18 95 / 83 87 89
English–6
1 609 929 P99 • 8.1.08

Publicité

Table des Matières
loading

Table des Matières