Functional Description; Intended Use; Product Features - Bosch DMF 10 Zoom PROFESSIONAL Instructions D'emploi

OBJ_BUCH-127-002.book Page 1 Tuesday, January 8, 2008 8:37 AM

Functional Description

Optimal working with the measuring tool is possi-
ble only when the operating instructions and
information are read completely, and the instruc-
tions contained therein are strictly followed.
SAVE THESE INSTRUCTIONS.
Please unfold the fold-out page with the representation of the measuring
tool and leave it unfolded while reading the operating instructions.

Intended Use

The measuring tool is intended for the detection of metals (ferrous and
non-ferrous metals, e.g., rebar), joists and "live" wires/conductors in
walls, ceilings and floors.

Product Features

The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4 "ZOOM" button
5 Wood-detection button
6 Metal-detection button
7 "on/off" button
8 Felt pads
9 Sensor area
10 Battery lid
11 Pencil for marking (removable)
12 Latch of battery lid
Display Elements
a "Live" wire indicator
b Wood detection indicator
c Metal detection indicator
d "ZOOM" function indicator
e "ZOOM" measuring indicator
f Measuring indicator
g "AutoCal" calibration indicator
h Indicator for magnetic metals
i Indicator for non-magnetic metals
j Switched-off audio signal indicator
k Battery indication
1 609 929 P99 • 8.1.08
English–1