Maintenance And Service - Bosch GRL 500 H Consignes De Fonctionnement/Sécurité

Problem
The laser receiver is defective, freezes or has
been lost, and the theft alarm is triggered.
A temporary software malfunctions occurring on
the laser receiver.
Store and transport the tool only in the
supplied protective case.
Keep the tool clean at all times.
Do not immerse the tool into water or
other fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the glass surfaces of the
laser tool for finger marks and debris.
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an authorized after-
sales service center for Bosch power tools.
2610A16816.indd 34
Maintenance and Service
-34-
Corrective Measure
Press the reset button 13.
The audio signal and the measuring tool are
switched off.
To reset the laser receiver to the delivery
condition, simultaneously press the On/
Off button 17 and the measuring accuracy
setting button 23.
The default settings for measuring accuracy
(medium), display illumination (activated),
unit display (mm) and audio signal (normal)
will be restored.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of
the tool.
In case of repairs, send in the tool packed in
its protective case 65.
ENVIRONMENT PROTECTION
Recycle raw materials &
batteries instead of disposing
of waste. The unit, accessories,
packaging & used batteries should be sorted
for environmentally friendly recycling in
accordance with the latest regulations.
11/13/15 1:12 PM