Maintenance And Cleaning; Environmental Protection - Bosch DLE 150 PROFESSIONAL Mode D'emploi

Checking the Measurement Accuracy
The accuracy of the instrument can be checked as follows:
– Select a distance that never changes that is approx. 1–10 m long
(e.g. room width, door opening) whose length is known exactly.
– Measure this distance ten times one after the other.
The measurement error can be a maximum of ±3 mm. Record the meas-
urements so that the accuracy can be compared at a later time.

Maintenance and Cleaning

Do not immerse the unit in water.
Wipe off dirt with a damp, soft cloth. Do not use aggressive cleaning
agents or solvents.
Take care of the unit, especially the receiving lens 22, by handling it in the
same manner as for eye glasses or a camera.
If the unit should fail despite the care taken in manufacture and testing,
repair should be carried out by an authorised customer services agent for
Bosch power tools.
For all correspondence and spare parts orders, always include the 10-
digit order number of the unit.
In case of repair, send in the unit in the protective bag 30.

Environmental Protection

Recycle raw materials instead of disposing as waste.
The unit, accessories and packaging should be sorted for environment-
friendly recycling.
These instructions are printed on recycled paper manufactured without
chlorine.
The plastic components are labeled for categorized recycling.
Do not throw used batteries into household waste, fire or water, but rather
– according to the applicable legal regulations – dispose of in an environ-
mentally friendly manner.
1 609 929 E99 • (03.09) T
English–11