Product Specifications; Intended Use - Bosch DLE 150 PROFESSIONAL Mode D'emploi

Product Specifications

Digital Laser Distance
Measuring Instrument
Order number
Measuring range (natural surfaces)
Measuring accuracy
Typical (0.3...30 m)
Maximum
Measuring time
Typical
Maximum
Smallest display unit
Operating temperature
Storage temperature
Laser type
Laser class
Diameter of the laser beam (at 25 °C),
approx.
at a distance of 10 m
at a distance of 50 m
at a distance of 100 m
at a distance of 150 m
Batteries
Rechargeable batteries
Battery service life approx.
Automatic switch-off
Laser
Instrument (without measurement)
Weight including battery approx.
Protection class
* The better the laser light is scattered (not reflected) back from the surface
of the target object and the brighter the laser point is in relation to the bright-
ness of the surroundings (interiors, twilight), the longer the range will be.
Under unfavourable conditions (e.g., measurement outdoors with strong
sunlight), it can be necessary to use a target panel.
** + 0.1 mm/m for distances over 30 m and for unfavourable conditions
such as, for example, strong direct sunlight
The serial number 21 for positive identification of your unit is located on
the nameplate on the underside of the case.
The "Type-approval certificate under German law" is located at the end of
these operating instructions.

Intended Use

The unit is intended for measuring distances, lengths, heights, spacings
and to calculate areas and volumes. The unit is suitable for measuring in
interior and exterior construction.
1 609 929 E99 • (03.09) T
DLE 150
PROFESSIONAL
0 601 098 303
0.3 ... 150 m*
±2 mm
±3 mm**
<0.5 s
4 s
1 mm
–10 °C ... +50 °C
–20 °C ... +70 °C
635 nm, <1 mW
2
6 mm
30 mm
60 mm
90 mm
4 x 1.5 V LR6 (AA)
4 x 1.2 V KR6 (AA)
30000 single measurements
20 s
5 min
430 g
IP 54 (dust and splash water
protection)
English–1