arjo Enterprise 9000X Notice D'utilisation page 22

3
4
Positioning the X-ray cassette
Pull the knob and slide the tray underneath the backrest.
The red moulding on the top of the X-Ray sitting tool indicates the top right
hand corner of the X-Ray cassette.Use this feature to assist in accurate
positioning.
X-Ray Sitting Tool
Release the knob to hold the tray in one of the latching positions.
After use, pull the tray out to the fully open position and remove the X-ray
cassette. Return the tray to the closed position below the backrest and
replace the head board.
22