Type-Identical Identification Marking; Use; Before Use; Preparing The Facepiece For Use - Dräger FPS 7000 Notice D'utilisation

The facepieces are tested in accordance with 94/9/EC for use in poten-
tially explosive atmospheres and meet the following protection classes:
Facepieces with visor PC
I M1
II 1 G IIB T6 -30 °C ≤ Ta ≤ +60 °C
II 1D
Facepieces with visor PCas or PCaf
I M1
II 1G IIC T6 -30 °C ≤ Ta ≤ +60 °C
II 1D
2.4

Type-identical identification marking

The facepieces have different marks:
Connector RA, PE, ESA, P
EPDM or Si,
Mask body
EN 136:1998 CL.3+, CE0158
Size of mask body S (small), M (medium), L (large)
Size of inner mask 1 (small), 2 (medium), 3 (large)
PC, F (fire brigade), according to EN 166
A (ballistic protection class 190 m/s)
T (ballistic protection class at extreme tem-
peratures,
Visor
tested at -30...+60 °C with 190 m/s)
PCas (coated with scratch-resistant material)
PCaf (coated with scratch-resistant material
on the outside, with anti-fog on the inside)
Rubber harness CR or Si, M/L or S
Mask/helmet adapter H61 (S-fix) or H62 (Q-fix)
Dräger FPS 7000
3

Use

3.1

Before use

Before using the helmet for the first time, the employer/user must en-
sure the following (see European guideline 89/656/EEC):
the fit must be perfect, e.g. to ensure an absolutely tight fit,
the Personal Protective Equipment must be compatible with other
types of protection equipment worn at the same time
(e. g. protective jacket),
the personal protective equipment must be suitable for the prevail-
ing workplace conditions.
the Personal Protective Equipment must be suitable for the ergo-
nomic requirements and the state of health of the person wearing
the breathing protection equipment.
the mask/helmet combination needs to be carefully adapted to the
equipment wearer (correct mask size, retaining plate settings and
internal helmet components) due to the rigid structure.
3.2

Preparing the facepiece for use

The mask bodies are available in sizes S, M, L, inner masks in sizes
1, 2 and 3. In most cases, a facepiece of standard size M2 is used. If
leak tightness is a problem, a facepiece sized S or L should be used.
NOTICE
i i
Each mask wearer must be provided with a mask of suitable
size.
Prior to use, always make sure that the facepiece is leak-tight.
The sealing line between head and facepiece must be free of
hair and foreign substances which could cause leakages.
Spectacle wearers should wear goggles.
(Certified by Dekra Exam)
Use
21