Section 3-Safety Inspection/Troubleshooting; Safety Inspection Checklists; Inspect/Adjust Initially - Invacare Patriot Manuel De L'utilisateur Et D'entretien

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
SECTION 3—SAFETY INSPECTION/
TROUBLESHOOTING
NOTE: Twice a year, take your wheelchair to a qualified dealer for a thorough inspection and
servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth operation of
your wheelchair. To operate properly and safely, your wheelchair must be cared for just like any
other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair. Initially
and at least every six (6) months, follow these maintenance procedures:

SAFETY INSPECTION CHECKLISTS

Initial adjustments should be made to suit the personal body structure needs and
preferences of the user. Thereafter follow these maintenance procedures:

INSPECT/ADJUST INITIALLY

Wheelchair rolls straight (no excessive drag or pull to one side).
Ensure all hardware is tight.
No bent or protruding metal on clothing guards.
All fasteners on clothing guards are secure.
Arms are secure but easy to release and adjustment levers engage properly.
Adjustable height arms operate and lock securely.
Armrest pad sits flush against arm tube.
Seat and/or back upholstery have no rips.
Inspect adjustable angle back attaching hardware is securely tightened.
Ensure hand grips are not loose.
Sealed bearings and axle nut tension are correct.
No excessive side movement or binding when rear wheels are lifted and spun.
Quick-release axles lock properly.
Inspect handrims for signs of rough edges or peeling finish.
Inspect for broken spokes.
Wheel/fork assembly has proper tension when caster is spun. Caster should come to
a gradual stop.
As with any vehicle, the wheels/casters and tires should be checked periodically for
cracks, flat spots and wear, and should be replaced.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Patriot™
CAUTION
24
Part No 1088909